1.Yu You, Akihiko Ito, Rong Tu, Takashi Goto: Effects of laser power on the growth of polycrystalline AlN filmsby laser chemical vapor deposition method, Surface and Coatings Technology, 232(2013)1-5. DOI: doi.org/10.1016/j.surfcoat.2013.04.043

2.Yu You, Akihiko Ito, Rong Tu, Takashi Goto: Preparation of the c-axis oriented AlN film by laser chemical vapor deposition using a newly proposed Al(acac)3 precursor, Journal of Crystal Growth 365 (2013) 1–5. DOI: doi.org/10.1016/j.jcrysgro.2012.12.034

3.HirokazuKatsui, Keiji Shiga, Rong Tu and Takashi Goto: Crystal growth of BaTi2O5 by the floating zone method, Journal of Crystal Growth, 384(1)(2013)66-70. DOI: doi.org/10.1016/j.jcrysgro.2013.09.017

4.Dongyun Guo, Akihiko Ito, Rong Tu and Takashi Goto: Microstructure and dielectric response of (111)-oriented tetragonal BaTiO3 thick films prepared by laser chemical vapor deposition, Journal of Asian Ceramic Societies, 1 (2013)197-201. DOI: doi.org/10.1016/j.jascer.2013.05.007

5.Dongyun Guo, Akihiko Ito, Takashi Goto, Rong Tu, Chuanbin Wang, Qiang Shen, Lianmeng Zhang: Preparation of TiO2 thick film by laser chemical vapor deposition method, Journal of Materials Science: Materials in Electronics, 24(6)(2013)1758-1763. DOI: doi.org/10.1007/s10854-012-1008-y

6.Dongyun Guo, Akihiko Ito, Takashi Goto, Rong Tu, Chuanbin Wang, Qiang Shen, Lianmeng Zhang: Effect of laser power on electrical conductivity of BaTi5O11 films prepared by laser chemical vapor deposition method, Journal of Materials Science: Materials in Electronics,24(6)(2013)1941-1946. DOI: doi.org/10.1007/s10854-012-1038-5

7Y. Kubota, H. Hatta, T. Yoshinaga, Y. Kogo, Takashi Goto, Rong Tu: Use of Volume Element Methods to Understand Experimental Differences in Active/Passive Transitions and Active Oxidation Rates for SiC, Journal of the American Ceramic Society, 96(4)(2013)1317-1323. DOI: doi.org/10.1111/jace.12141

8.Ai Momozawa, Rong Tu, Takashi Goto, Yuuki Kubota, Hiroshi Hatta, KimiyaKomurasaki: Quantitative evaluation of the oxidation behavior of ZrB2-15vol.%SiC at a low oxygen partial pressure, Vacuum,88(2013)98-102. DOI: doi.org/10.1016/j.vacuum.2012.04.004

9.Yu You, Akihiko Ito, Rong Tu, Takashi Goto: Preparation of the c-axis oriented AlN film by laser chemical vapor deposition using a newly proposed Al(acac)3 precursor, Journal of Crystal Growth,365(2013)1-5. DOI: doi.org/10.1016/j.jcrysgro.2012.12.034

10.Yansheng Gong, Rong Tu and Takashi Goto: High-speed deposition of titanium carbide coatings by laser-assisted metal-organic CVD, Materials Research Bulletin, 48(2013)2766-2770. DOI: doi.org/10.1016/j.materresbull.2013.03.039

11.Hirokazu Katsui, Yuji Yamashita, Rong Tu and TakashiGoto: Preparation of Li-Co-O film by metal organic chemical vapor deposition, Journal of the Ceramic Society of Japan, 121(5)(2013)1-5. DOI: doi.org/10.2109/jcersj2.121.406

12.Zhenhua He, Rong Tu, Hirokazu Katsui and Takashi Goto: Synthesis of SiC/SiO2 core–shell powder by rotary chemical vapor deposition and its consolidation by spark plasma sintering, Ceramics International, 39(2013)2605- 2610. DOI: doi.org/10.1016/j.ceramint.2012.09.025

13.Junko Hieda, MitsuoNiinomi, Masaaki Nakai, Ken Cho, Tatsuya Gozawa,HirokazuKatsui, Rong Tu, Takashi Goto: Enhancement of adhesive strength of hydroxyapatite films on Ti-29Nb-13Ta-4.6Zr by surface morphology control, Journal of the Mechanical Behavior of Biomedical Materials, 18(2013)232-239. DOI: doi.org/10.1016/j.jmbbm.2012.11.013

14.Jianfeng Zhang, Rong Tu andTakashi Goto: Precipitation of Ni nanoparticle on Al2O3 powders by novel rotary chemical vapor deposition, Journal of the Ceramic Society of Japan, 121(2013)226-229. DOI: doi.org/10.2109/jcersj2.121.226

15.Dongyun Guo, Akihiko Ito, Takashi Goto, Rong Tu, Chuanbin Wang, Qiang Shen and Lianmeng Zhang: Effect of laser power on orientation and microstructure of TiO2 films prepared by laser chemical vapor deposition method, Materials Letters, 93(2013)179-182. DOI: doi.org/10.1016/j.matlet.2012.11.121